terziyskiLV7Online
Following: 0Followers: 39
Forums/ Range Extenders
2024-05-13 16:25:36
Re:RE220 Extender Mode, Dead Ethernet Port
@vbPhil In the thread I posted the OP is using RE220 ethernet port in RE mode for connecting a wired device. Did you try another ethernet cable as I suggested ? If nothing helps contact your retailer...
0HELPFULS
Forums/ Range Extenders
2024-05-13 15:17:35
Re:RE220 Extender Mode, Dead Ethernet Port
@vbPhil A way to be sure that RE ethernet port is working properly is to switch the RE in AP mode and test the behaviour. Change the ethernet cable that you're using - use the cable from the RE kit...
0HELPFULS
Forums/ Range Extenders
2024-05-12 18:04:57
Re:Enable ping from WAN temporarily
@jlock02 If you've meant the RE - it doesn't have a WAN port, it has only LAN port. If you've meant your router - the RE can't change your main router settings - it's just a repeater. This must be...
0HELPFULS
Forums/ Access Points
2024-05-11 22:59:17
Re:Can't configure EAP245
@Tex1301 Try this guide for configuring the EAPs.
1HELPFULS
Forums/ Range Extenders
2024-05-11 22:52:59
Re:Enable ping from WAN temporarily
@jlock02 Enable ping from WAN temporarily is possible only for wireless modems/routers. REs should not block any ping requests/responses on their ethernet port.
0HELPFULS
Forums/ Range Extenders
2024-05-11 22:50:31
Re:RE220 Extender Mode, Dead Ethernet Port
@vbPhil In RE mode you should be able to use the RE ethernet port for a wired client devices.
0HELPFULS
1303132...