@Wort55 If you can share some screen shots, I would be happy to assist in troubleshooting this concern. Forum troubleshooting isn't always ideal so I would also suggest checking out this video for...

@Wort55 Depending on how you configured the extender you likely need to go back and configure the 5GHz too. For example, if you used WPS, you would need to run the process twice to connect each band....

@GGilmore The Ethernet Backhaul of our Deco products applies to the traffic between the Deco nodes. This can be facilitated directly by connecting the Decos to themselves or through an intermediary...

@m_dol It appears there is a discrepancy between the camera and what is showing in the app. Please reset the camera and try to reconfigure it. If it is still failing then we would want to consider...

@AviGam The Archer AX50 and Archer AX3000 are two different products. The Archer AX50 is not listed on the compatibility list and does not support OneMesh. As for the Archer AX3000 v1, the...

@m_dol For the 2nd camera is the LED blinking Red and Green? If not then the camera is not in setup mode and will need to be reset by pressing the reset button for 30 seconds. The Reset button in on...