@OldGeezer Yes, for PLC to work one of the adapters must be physically connected to your router, in this case the Archer AX21, via Ethernet cable. This is because the statlite unit does not...

@JimmyDThing Could you elaborate on what you mean by do not match? Are you referring to the faceplate and switch toggle doesn't match? For the dimensions, the cutout for the toggle is, in most cases,...

@JimmyDThing To be honest there would have to be a market for it for it to make sense to manufacture, and package the faceplates seperatly from the switches themselves. The good news is that our...

@Twolteri The features for preferred node and preferred band are available on Deco S4 hardware version 4.6 and will be a staple feature on any future hardware versions. The feature is not yet...

@Redsoxbill Have you tested the ethernet port on the satellite Deco or on the switch they are connected to? If so then please let us know the following Hardware version of your Deco Firmware version...

@netmandon This is pretty easy to do. Open the Deco App Tap on the 3-Bars in the upper left corner Look for the two sideways arrows next to your current network name and tap on them You will then...