@yves_b As I read it, the bitrate is 200-ish BITS per second, or 25 mb/sec, which is still about 1/4 of what I would expect. If the problem is indeed the backhaul, what should I do about it?

@Zudnic I ran an iperf3 test in both directions between a laptop (192.168.68.15) connected to the base Deco via wifi and the server (192.168.68.251) which is connected to the same (base) Deco via...

@yves_b I will test that and report back.

@yves_b - Thank you- yves_b wrote @Zudnic Do you mean a laptop has higher bandwidth with internet than with a server wired on the base Deco? Yes, that is true, but the problem is more general. The...

@yves_b thank you - The server is wired by cat6 to the base Deco unit. The other computers are connected by wifi to the Deco system. They are not on the guest or IoT networks. To check open Internet...

I have a XE75 Deco system. I've run the interference optimizer, on the latest firmware, they are all on the same (primary/non-guest, non-IoT) network, and have set my four test devices to have "high...