arobert74LV1Online
Following: 0Followers: 0
Forums/ Deco
2024-01-24 00:36:14
Re:Topology recommendation
@Riley_S Sorry, another question. I have 4 Deco X20. Question on the 3 satellite nodes. Do each communicate to the main only, or can one node connect to another satellite node? I am guessing the...
0HELPFULS
Forums/ Deco
2024-01-23 23:54:58
Re:Topology recommendation
@Riley_S Thanks for all the information. I just noticed something else. From the app, going to > Wi-Fi Settings > here is showing '2.4 GHz Network' so select it > Advanced > Here is showing '2.4 GHz...
0HELPFULS
Forums/ Deco
2023-12-18 18:23:47
Re:Topology recommendation
@Riley_S Hi I changed my gateway to Bridge Mode. Will see if my re-connections to the wifi work better. So far, so good! I tested my wifi speeds (download/upload) using the speedcheck app from my...
0HELPFULS
Forums/ Deco
2023-12-13 20:23:24
Re:Topology recommendation
Thanks for the response. The only Deco that is near a possible electrical reference is the "Main" one which is my office so near two computers. Could this be a problem? My throughput (download speed)...
0HELPFULS
Forums/ Deco
2023-12-13 19:35:01
Re:Deco X20: devices previously setup takes long time to connect to Wifi
@Riley_S thanks for the reply! 1. For the Hardware version, the "Main" Deco is V4.0 The one I bought by itself is US/3.6 2. Checking my Xfinity gateway, it has a Bridge Mode and it is Disabled I...
0HELPFULS
Forums/ Deco
2023-12-13 16:45:22
Topology recommendation
Model: Deco X20 Firmware Version: 1.1.1 Build 20230721 Rel. 48732 on main Deco and two others. One other one is 1.1.4 Build 20230824 Rel. 63641 (which was bought later) "Update Deco" page in the App...
0HELPFULS
12