CuldeeLV1Offline
Following: 0Followers: 0
Forums/ Wi-Fi Routers
2018-02-24 02:26:28
Re:TL-WDR4300: 2.4GHz band repeated signal failure, but 5GHz band just fine
Marco1970 wrote I'm pretty sure it's out of warranty, since i'm sure i had it for longer then 3 years. It's only lately that it became so slow and instable. I know it's not the antennas, since i...
0HELPFULS
Forums/ Wi-Fi Routers
2018-02-20 02:11:16
Re:TL-WDR4300: 2.4GHz band repeated signal failure, but 5GHz band just fine
Marco1970 wrote Same problem, at 2.4ghz, the connection is super slow, even to slow for a wireless scan of documents, loses connection repeatedly, impossible to work with, even my old Linksys does...
0HELPFULS
Forums/ Wi-Fi Routers
2017-02-10 15:56:11
Re:TL-WDR4300: 2.4GHz band repeated signal failure, but 5GHz band just fine
Sorry to hear that. Recently I've had to reboot mine twice within half an hour. That's unacceptable. So if you've ensured you have the most recent firmware, factory reset, etc etc...then you have a...
0HELPFULS
Forums/ Wi-Fi Routers
2017-02-08 23:41:26
Re:TL-WDR4300: 2.4GHz band repeated signal failure, but 5GHz band just fine
Thanks for your response. If you went through the same troubleshooting steps as myself and the issue is still occurring, then you have a defective device according to their tech support (I've been...
0HELPFULS
Forums/ Wi-Fi Routers
2017-01-06 16:03:23
Re:TL-WDR4300: 2.4GHz band repeated signal failure, but 5GHz band just fine
Bump... So disabling the hardware NAT function did not solve the issue. The router continues to drop the 2.4GHz band beyond detection by any device. This is absolutely ridiculous. I was trying to...
0HELPFULS
Forums/ Wi-Fi Routers
2016-12-27 15:39:15
Re:TL-WDR4300: 2.4GHz band repeated signal failure, but 5GHz band just fine
tplink wrote Hi, May I know how many clients you connect the 2.4GHz wifi of WDR4300? And what about the model No. of wifi adapter on your computer? A suggestion to try, login the management page of...
0HELPFULS
12