Back to "Operation Failed" again when trying to access the UI. First the multiSSID +VLANs didn't/don't work the way I expected/wanted which was the main reason I replaced the old rusty but trusty...

Rebooted AP (power cycled) now can again access the UT. Must be a glitch in the firmware or whatever. Hopefully something can be patched up.

First, please add TL-WA3001 to the models list selection so posts can be properly tagged. When I try to access the configuration UI of TL-WA3001 by using the assigned static IP it fails to show the...

I'm trying to use the multiSSD function with VLANs but struggling to make it work as I was thinking it should. Tried to write up a description of the connections and settings, but thought perhaps a...

FWIW, sure seems to be a bug or quirk of WA3001. I also have WA1201 and on it you can change and save the VLAN number without needing to change the SSID.

@Budwizer007 Thanks for that information and workaround! I just ran into the same problem. Without your suggestion to change the SSID names I doubt I would have figured out why the new VLAN numbers...