@GitchiGummi Just to be clear, if you have a device with a static ip address that you cannot see or set up in Deco and you want to configure port forwarding and an address reservation for it: 1)...

@GitchiGummi That suggestion worked!! I had forwarded teh port at a given address for a router that I was trying to use to get this to work on a dual router set-up (that idea failed). I assigned that...

@Don.M Thank you. I will try that. i think I can get Port Forwarding set that way, but not Address reservations. The Deco app lists the MAC address of the Client as well as the ip in the Address...

@GitchiGummi

@GitchiGummi The Omni is programmed with an ip address in the standard format using a control panel. I am not able to configure any additional network parameters. So, it has a static ip address, as I...

@TP-Link Unfortunately, the Omni only supports a static ip setup, it does not support dynamic ip protocols.