DFW_MarkLV1Online
Following: 0Followers: 0
Forums/ Wi-Fi Routers
2022-06-06 14:55:23
How To Enable WDR3600 IP Passthrough Mode?
How to enable WDR3600 IP passthrough mode to connect to AT&T gateway device? I only see this i the manual: VPN - VPN Passthrough must be enabled if you want to allow VPN tunnels using VPN protocols...
0HELPFULS
Forums/ Range Extenders
2022-02-28 18:58:34
Re:How To Connect Two RE450 (or wireless access point) Via Ethernet?
Thank you for your reply, but I don't want to connect Either device to the router via Ethernet - that's what I'm trying to avoid. I don't want to run Ethernet through walls or ceilings.
0HELPFULS
Forums/ Range Extenders
2022-02-28 15:22:23
How To Connect Two RE450 (or wireless access point) Via Ethernet?
I have an RE 450 extender connected to my TL-WDR3600 router. I want to connect it to another RE450 extender or appropriate device (wireless access point?) via Ethernet. One RE450 (#1) will be in my...
0HELPFULS
Forums/ Range Extenders
2021-02-04 14:28:43
Cannot connect/forget RE450 connection profile from one device
I have an RE450 (SSID = My5ghzX) that suddenly lost connection on one PC and can no longer connect. I know the RE450 is working because I have an iPad, two iPhones, and a TV connected to it. After it...
1HELPFULS
Forums/ Range Extenders
2021-02-02 04:41:21
Changing Channel
I want to change the channel on my RE450 that's connected to my TL-WDR3600 router. If I change the channel on the router then reset the RE450 (paper clip hole) will it automatically find and...
0HELPFULS