I have my Deco M9 system set in Access Point mode (and hard wired to the ISP modem/router). I disabled the WiFi on the ISP router, so everything in my house sees the Deco and no other WiFi. (Of...

I saw that there is a new camera, the KC401. I compared the specs with the KC400 and don't see any differences. The product pages show only one detection zone on the KC401 (although the text says...

I have one new KL130 that turns itself on randomly even though other bulbs (KL110 and KL130) do not ever do that. They all have the same software version, 1.8.11. Has anyone come up with a solution....

If you are willing to spend around $15 you can get a USB to Ethernet adapter from Amazon. That should allow your laptops to plug into the switch and then you can ping or do other troubleshooting.

As I said in my last message, if there were more news I would post an update. The configuration I described in August worked, but not completely to my satisfaction. With the Pi-hole connected to the...

My Deco M9 Plus system has the imformation shown. My "Bedroom" node is connected to the "TV Room" the main node via 2.4GHz/5Ghz_1/5 Ghz_2. I see this by following the screens that TPLink shows....