Archer C1200 - Devices won't connect to 2.4ghz
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer C1200 - Devices won't connect to 2.4ghz
Model :
Hardware Version :
Firmware Version :
ISP :
Hi folks. I bought the TP Link Archer C1200 a couple of months back on Amazon. It has worked great, up until a couple of weeks ago. I'm now having problems with my devices staying connected/connecting to the 2.4ghz band. 5ghz is working perfectly fine, however it takes a very long time for devices to connect to 2.4ghz. New devices, such as a friends phone, won't connect to the 2.4ghz band at all. The devices all see the band there, however they will not connect. I have the 2.4ghz as a separate band from the 5ghz. I've tried changing the channel of the band, as well as the channel width. Nothing seems to work. The firmware is up to date. Any help you can provide to alleviate this problem is appreciated. Unfortunately, my laptop and thermostat don't support 5ghz, so making sure I can connect to the 2.4ghz band is important. Thanks!
Hardware Version :
Firmware Version :
ISP :
Hi folks. I bought the TP Link Archer C1200 a couple of months back on Amazon. It has worked great, up until a couple of weeks ago. I'm now having problems with my devices staying connected/connecting to the 2.4ghz band. 5ghz is working perfectly fine, however it takes a very long time for devices to connect to 2.4ghz. New devices, such as a friends phone, won't connect to the 2.4ghz band at all. The devices all see the band there, however they will not connect. I have the 2.4ghz as a separate band from the 5ghz. I've tried changing the channel of the band, as well as the channel width. Nothing seems to work. The firmware is up to date. Any help you can provide to alleviate this problem is appreciated. Unfortunately, my laptop and thermostat don't support 5ghz, so making sure I can connect to the 2.4ghz band is important. Thanks!
