Can wired backhaul be achieved using the SFP ports on the satellite Deco units?

Can wired backhaul be achieved using the SFP ports on the satellite Deco units?

Can wired backhaul be achieved using the SFP ports on the satellite Deco units?
Can wired backhaul be achieved using the SFP ports on the satellite Deco units?
2024-09-06 19:58:21
Model: Deco BE85  
Hardware Version:
Firmware Version:

I'm wondering if I can achieve wired backhaul using the SFP ports on the satellite routers. 
 

ONT > Main BE85 router SFP+ port, Main BE85 router 10G port > Satellite router SFP+ port (or first to a switch, then to each satellite SFP+).

 

Would this configuration work? It could free up a 10G port on each satellite unit.

  0      
  0      
#1
Options
2 Reply
Re:Can wired backhaul be achieved using the SFP ports on the satellite Deco units?
2024-09-09 11:04:25

  @JM22 

The SFP port is not reserved for access to WAN, you can use it to connect to Deco, devices and switches.

  0  
  0  
#2
Options
Re:Can wired backhaul be achieved using the SFP ports on the satellite Deco units?
2024-09-12 21:14:20

Hi  @JM22 

 

Welcome to the community.

 

Yes, you can use the SFP+ Ports to interconnect your Deco nodes. Please note that the 10G port labeled as "Combo" with the SFP+ port cannot be used simultaneously while the SFP+ port is in use; only one of the combo ports can be used at a time.

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 226

Replies: 2

Related Articles