Home

Forums

Stories

Knowledge Base

Home Network Community > All Threads > Constant errors fill the logs

< All Threads

Constant errors fill the logs

Jack58

2024-08-11 01:37:54

Posts: 1

Helpful: 1

Solutions: 0

Stories: 0

Registered: 2024-08-11

Constant errors fill the logs

2024-08-11 01:37:54

Tags: #Firmware Update

Model: Deco XE75

Hardware Version: V2

Firmware Version: 1.2.10 Build 20240325 Rel. 57182

Continuous stream of errors fill the logs....

Sat Aug 10 19:03:38 2024 user.notice IMPROXY: INFO[imp_input_report_mldv2@461]: MLD_MODE_IS_EXCLUDE

Sat Aug 10 19:03:38 2024 user.notice IMPROXY: INFO[imp_verify_multicast_addr@245]: Group address 224.0.0.251 is Local Network Control Block

Sat Aug 10 19:03:38 2024 user.notice IMPROXY: INFO[imp_verify_multicast_addr@245]: Group address 224.0.0.7 is Local Network Control Block

Sat Aug 10 19:03:38 2024 user.notice IMPROXY: INFO[imp_veri

1 Reply

Riley_S

2024-08-12 22:00:44

Posts: 3009

Helpful: 888

Solutions: 117

Stories: 39

Registered: 2022-04-18

Re:Constant errors fill the logs

2024-08-12 22:00:44

@Jack58,

I do not believe that these are concerns as they are labeled as INFO and notice logs, not ERRORs or Warnings.

Are you seeing any unexpected behaviors or problems with your devices' connections that led you here?

I do not know too much about MLD and how it is configured, only that it is used in IPv6 addressing, as essentially an equivalent for IGMP snooping - which is a toggleable setting in many Decos Advanced Settings.

Check out the Latest: Getting Started with EasyMesh and TP-Link New Tablet Mode for the Tapo App Comparing the Latest Tapo Doorbells

Jack58

2024-08-11 01:37:54

Posts: 1

Helpful: 1

Solutions: 0

Stories: 0

Registered: 2024-08-11

Information

Helpful: 1

Replies: 1

Constant errors fill the logs

Constant errors fill the logs

Information

Voters 1

Tags