@DTom I am seeing the exact same thing. Did you try contacting support? I spent over and hour with slow response support with no solution yet.

  @parikrama  Yes, I have a support Email going with them.  So far no resolution as the only suggestion so far is to uninstall/reinstall app (Didn't work).   I don't think it is app related.  I can log into my Deco's from my laptop (192.168.68.1)) and I see the same 0 clients connected.  Seems to be Firmware or Hardware issue.  

(I did resolve the WeMo issue, which seemed to be related to some old smartswitches not playing well with a Mesh network.  I replaced.)

  @DTom Same happening to me, same firmware version and I can confirm this didn't happen on earlier firmware versions (can't say for sure if previous one had the issue or not but for sure this did not happen before then).

Setup: three X50s, all in mesh WiFi with one of them being the router and wired into modem.

  @parikrama 

Interesting.  Thanks for sharing.  

I've also been communicating directly with tech support.  The change they had me do yesterday was "Change LAN IP to 192.168.0.1 and subnet mask to 255.255.255.0".   So I'm 24 hrs out from that change and no problems, although sometimes it has been longer from a reboot for the problem to show up...so watching it.

Nice to see though it's being addressed in a Firmware update.  Apparently they know they have a problem.

  @parikrama 

I've been running 1.5.5 20240718 Rel. 44414 for about a week now and this seems to have resolved the problem.  

Hello All,

does anybody solved this issue? I have the same problem with X50 and M5.

Thanks