Home Network Community > All Threads > Nest Protect Fails to Connect
< All Threads

Nest Protect Fails to Connect

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Nest Protect Fails to Connect

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Nest Protect Fails to Connect
Nest Protect Fails to Connect
2024-01-20 22:45:01 - last edited 2024-01-28 18:39:57
Tags: #Client Devices #IPv6 #NestProtect
Model: Deco BE85  
Hardware Version: V2
Firmware Version: 1.0.14 Build 20231124 Rel. 32537

Hi There,

 

I love this TPLink. Everything works great! However, none of my nests will connect anymore. ALL my other devices instantly connected as soon as I turned it on and I'm using the EXACT same SSID and PWD as I had in my previous routers. I did recently enable security plus, and I had enabled IoT Isolation. I have since tried disableing isolation, but its still not connecting. 

 

Online it talks about having IP V6 enabled but I dont know where to set that up in the Deco App. In any case, I'd appreicate any other ideas? The Nest Protects are the ONLY thing not working anymore. So really appreciate the help!

 

Amir

  2      
 
  2      
 
#1
Options
2 Accepted Solutions
Re:Nest Protect Fails to Connect-Solution
2024-01-22 22:06:04 - last edited 2024-01-28 18:39:57

  @ThorinAL My nest protect would not let me switch to the new network, so I factory reset them and all five connected easily... FYI, I'm not a techie just a novice and that's how they work for me.

Recommended Solution
  2  
  2  
#4
Options
Re:Nest Protect Fails to Connect-Solution
2024-01-28 18:39:27 - last edited 2024-01-28 18:40:09

 Ok...so I did exactly as you said. I removed ALL Nests, reset and reinstalled them. And it worked!!!

 

really sucks though because I have like 12 of these in some pretty hard to reach places. So hopefully I never go through this again :)

 

amir

 

Recommended Solution
  0  
  0  
#6
Options
5 Reply
Re:Nest Protect Fails to Connect
2024-01-22 09:04:33

  @ThorinAL 

Hi, welcome to the community.

Would there be any error message when Nest Protect is unable to connect to Deco BE85?

Have you tried to enable the IOT network for 2.4GHz with security mode WPA2?

 

As for the IPV6, Does your internet service support IPV6?

If yes, you could enable the IPV6 under Deco APP>More>Internet Connection>IPV6.

Wait for your reply and best regards.

 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:Nest Protect Fails to Connect
2024-01-22 19:07:42 - last edited 2024-01-28 18:39:48
No, Nest Protect doesnt tell you anything besides 'Its not connecting/ :). Its not very helpful. Yes, I have enabled IoT 2.4. I copied my EXACT config that I had with my previous router. And as I mentioned, ALL my other older devices are connecting just find. But for some stupid reason, these are not. Anyone else ever run into this? Amir
  0  
  0  
#3
Options
Re:Nest Protect Fails to Connect-Solution
2024-01-22 22:06:04 - last edited 2024-01-28 18:39:57

  @ThorinAL My nest protect would not let me switch to the new network, so I factory reset them and all five connected easily... FYI, I'm not a techie just a novice and that's how they work for me.

Recommended Solution
  2  
  2  
#4
Options
Re:Nest Protect Fails to Connect
2024-01-22 22:53:20
LOL, yes...thats the path I am trying to avoid!! :) But it was my backup plan if no one else has any ideas. Thank you!
  0  
  0  
#5
Options
Re:Nest Protect Fails to Connect-Solution
2024-01-28 18:39:27 - last edited 2024-01-28 18:40:09

 Ok...so I did exactly as you said. I removed ALL Nests, reset and reinstalled them. And it worked!!!

 

really sucks though because I have like 12 of these in some pretty hard to reach places. So hopefully I never go through this again :)

 

amir

 

Recommended Solution
  0  
  0  
#6
Options

Information

Helpful: 2

Views: 932

Replies: 5

Tags

Client Devices IPv6
NestProtect
Related Articles
Google Nest Camera won't connect
1777 0
Nest Thermostat Connection Issue
606 0
Google nest mini won't connect to AX1500
2006 0
Nest Outdoor Cameras won't connect to my TP Link mesh wifi
1227 1
How to Protect Yourself from Technical Support Scams
3355 1
Deco M5 fails to connect to internet
1179 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.