access point

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

access point

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
access point
access point
2023-02-26 07:37:04 - last edited 2023-10-09 14:41:05
Model: Archer C7  
Hardware Version: V5
Firmware Version: 1.0.4

need to setup this router basically as an access point, from the main house router, cannot realistically connect to main house router via ethernet cable, needs a wireless host, it can only connect to its clients via ethernet which is easy for the clients

the spec help indicates it can only be access point when connected to host via ethernet cable

looking for someway to connect via wireless to main house router either static or dhcp and then have cameras for clients

and be able to send contents of camera clients to an internet address, going through the main house router

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:access point-Solution
2023-02-26 18:54:40 - last edited 2023-10-09 14:41:05

  @bbx 

 

You can use WDS feature to connect C7 to your main router wirelessly.

Check C7 user guide - FAQ section (at the end of the guide) - Q4.

Here's a guide on how to configure WDS.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#2
Options
1 Reply
Re:access point-Solution
2023-02-26 18:54:40 - last edited 2023-10-09 14:41:05

  @bbx 

 

You can use WDS feature to connect C7 to your main router wirelessly.

Check C7 user guide - FAQ section (at the end of the guide) - Q4.

Here's a guide on how to configure WDS.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#2
Options

Information

Helpful: 0

Views: 578

Replies: 1

Related Articles