@B0EJENS0N 

Hi, welcome to the community.

When you go to the device settings of "Joe-s-S22", will you see any information like this?

If not, please turn off the "Mesh technology" of this device first, then check again under the device settings.

Wait for your reply.

Best regards.

  @B0EJENS0N,

Updates are rolling out to Decos slowly that introduces this specific function, however, this is still in development for models.

I would read through this article to learn what settings you may want to alter: Mesh Settings on Deco

I would look at both mesh networking and fast roaming options to see if they improve the connection.