XE200 10g port and fios speed issue

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

XE200 10g port and fios speed issue

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
XE200 10g port and fios speed issue
XE200 10g port and fios speed issue
2022-10-23 19:58:35
Model: Deco XE200  
Hardware Version: V1
Firmware Version: 1.0.0

I have fios gigabit I ran into a issue with the new XE200 series units. When I put my FiOS ONT directly to the 10g port I get uploads of no higher than 5mbps. When I move the ONT to one of the 1g ports I get 800mbps. I confirmed with FiOS support there are no problem over the line and swapping ports back and forth always creates the issue and resolves it. Totally reproducible. The cable from the ONT is cat6. I am using my decos in router mode. Any reason why I get this result? Bug in the new hardware? I can post speed test pics...

 

  0      
  0      
#1
Options
6 Reply
Re:XE200 10g port and fios speed issue
2022-10-23 20:17:07
Also 2nd thing to note: The DHCP lease time is very aggressive with my devices changing IPs almost daily if I don't set the to reserved. Anyway to adjust the lease time?
  0  
  0  
#2
Options
Re:XE200 10g port and fios speed issue
2022-10-23 21:02:55

ONT to 10g port:

 

35cf7e0375a740d9ab5e99424d1888be

 

ONT to 1g port:

 

  2  
  2  
#3
Options
Re:XE200 10g port and fios speed issue
2022-10-24 07:41:50

  @Astone595 

Good day, Thanks a lot for your feedback.

It has been reported to the senior engineers already and they are working on it now. At the same time, we would like to follow up on your case via email and the engineer will update the email as soon as they have any improvement.

Thank you again.

Best regards.

  0  
  0  
#4
Options
Re:XE200 10g port and fios speed issue
2022-10-24 13:03:16

  @David-TP To be clear which issue are you reffering to or is it both?

  0  
  0  
#5
Options
Re:XE200 10g port and fios speed issue
2022-10-25 01:19:40

  @Astone595 

Hi, Sorry for the delay. It is mainly the first feedback about upload speed. As for the DHCP release time, you could have a talk with the engineers for a workaround maybe since so far Deco does not support changing the DHCP release time.

And please do remember to update the email with the engineers.

Thank you very much.

Best regards.

  0  
  0  
#6
Options
Re:XE200 10g port and fios speed issue
2022-10-25 01:24:44

  @David-TP I am thanks. Working on getting a time slot to work with them on the issue.

  2  
  2  
#7
Options