Can't see my Wifi 6 SSID with devices that support Wifi 6 with my Archer AXE300
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Just bought this this new router. My 2.4 and 5 SSID's are fine. Can't attach or find my 6G SSID with devices that support 6G. Even if I manually put in the SSID and creds it does not work. It's a AXE300 and not a AXE75.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thanks, I figured this out shortly after my post. The 6MHZ SSID will only be visible with to 6E devices. I thought it was going to be see all Wifi 6 devices. I have a Samsung TV that supports 6E and was able to confirm and attach.
- Copy Link
- Report Inappropriate Content
Be aware that most of the adapters or phones don't support the 6G band yet, you can check the FAQ provided by TP-Link.
What are the 6G devices that you are trying to connect to the 6G network of the AXE300? Are they able to find other 6G signals? If it is an Intel adapter, you can also read this FAQ to update its driver.
Update: I also find a very helpful thread here, you can read and check it.
- Copy Link
- Report Inappropriate Content
Thanks, I figured this out shortly after my post. The 6MHZ SSID will only be visible with to 6E devices. I thought it was going to be see all Wifi 6 devices. I have a Samsung TV that supports 6E and was able to confirm and attach.
- Copy Link
- Report Inappropriate Content
That's right. Only those devices that support 6GHz can see the 6GHz signal, others can only connect to the 2.4GHz or 5GHz.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1703
Replies: 3
Voters 0
No one has voted for it yet.