Home Network Community > All Threads > AX5400 Missing DNS Settings with static IP / DHCP requests 30 seconds
< All Threads

AX5400 Missing DNS Settings with static IP / DHCP requests 30 seconds

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AX5400 Missing DNS Settings with static IP / DHCP requests 30 seconds

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AX5400 Missing DNS Settings with static IP / DHCP requests 30 seconds
AX5400 Missing DNS Settings with static IP / DHCP requests 30 seconds
2022-06-28 09:06:20 - last edited 2022-06-28 09:07:42
Model: Archer AX73  
Hardware Version: V1
Firmware Version: 1.2.2 Build 20220317

Hi,

 

first i tried to set the router to an static IP. However it was then unable to check for updates. I then noticed there is simply no setting for DNS

 

AX73

b27f705d4dbb47b4abaec14b2ff0e883

 

RE550 has an option for dns

617d7e52a5ce46f5b0684d61cb5ca30c

 

So i set it to DHCP. Which "resolved" the issue. However, and i don't think this is to be expected since no other Device does this... the AX73 is requesting the IP about every 30 Seconds!

 

8f110e8f0c9f43a085b08b989876ee61

 

Am i missing something or did i find 2 Bugs in one go?

 

  0      
 
  0      
 
#1
Options
3 Reply
Re:AX5400 Missing DNS Settings with static IP / DHCP requests 30 seconds
2022-06-29 06:44:22

Hello @Virus2500 

 

Based on the information you provided, it seems the Archer AX73 is working as an Access Point, and you are trying to set a static IP address for it with the purpose of disabling the frequent DHCP request, am I right?

 

Firstly, I would like to explain why it sends the DHCP request when it's working in AP mode. It uses Smart DHCP by default when you configure it at AP mode, and it will continuously check if the DHCP server on the network is correctly on, it will turn itself on if it finds there is no DHCP server in the network.

 

Instead of using a static IP address on the AX73, I would suggest setting an Address Reservation for the AX73 on the host router, then you may check if the AX73 can check for the updates automatically.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:AX5400 Missing DNS Settings with static IP / DHCP requests 30 seconds
2022-06-29 06:57:52

  @Kevin_Z Hello, thanks for your answer. Yes you are correct. It is set to act as an access point. So the AX has this smart DHCP Feature and the RE550 doesn't?

 

I would like to set it to static IP since this my preferred way of configuring network devices. I prefer to only use DHCP for "real" clients like PCs/Smartphones and the likes. 

 

I already have an address reservation so that's not an issue (and does in fact work with updates), but i was just wondering why it sends an request every minute (which you have answered) and why the RE550 isn't showing this behavior. Also i still think the DNS setting is missing if i set it up with an static IP. 

  0  
  0  
#3
Options
Re:AX5400 Missing DNS Settings with static IP / DHCP requests 30 seconds
2022-08-26 06:20:15

Still no fix for this?

 

ee0dec4c12c94b21b01678ea013c043a

 

In my Network there are about 30 DHCP Hosts and only the AX73 is acting up + there is still no option to define an DNS Server once you go with an static IP in "Access Point Mode"

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 754

Replies: 3

Related Articles
AX73 as AP with static IP = no DNS
934 0
AX73 (AX5400) Missing 5Ghz Channels
553 0
AX5400 / Archer AX73 in Access Point mode: cannot use static IP address
1979 0
Static DHCP outside of dynamic DHCP range.
785 0
DHCP - reservation issue - "Enter an IP address within the IP address pool."
3067 1
Guest Network separate DHCP/DNS settings
260 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.