Satellite Deco P9 Stuck on Yellow
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to fix the satellite TP-LINK Deco P9 stuck on yellow? IIs there any tool or means to the repair even through the PC?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
The yellow LED may indicate it is in recovery mode as the reset may have been held for more than 10 seconds.
Leave the Deco powered on for several minutes, then hold the reset for one second, then let go. See if the pattern eventually changes. If that does not work, please do the same process to see if the Deco eventually comes out of it.
- Copy Link
- Report Inappropriate Content
@Tony thank you. I've tried em all, but none of which has worked.
- Copy Link
- Report Inappropriate Content
One other thing you can potentially try is the firmware recovery method: https://community.tp-link.com/en/home/stories/detail/672
The user mentions the Deco M4, but use the P9 firmware with the same method.
Should that fail, I would recommend reaching out to support.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1348
Replies: 3
Voters 0
No one has voted for it yet.