@Carl ,

Yes, did all that.

I think it 'broke' when Parker put the Beta on? Then re-installed V1 f/w. The next day or so I was out and tried it and discovered it wasn't working? When I got home I saw Remote Access wasn't on. Turned that on and the next day tried... still couldn't connect. So I tried the unbind/bind, re-boot, Uninstalled Tether, reinstalled it, signed in again. I just checked it again, can't find a device? Very confusing to me as I thought I knew how to connect to it? This is the latest entry in the log dealing with Remote Access:

As you can see, it was set and the service did start? I can get to the A20 when on Wifi with no problem, just not when I'm on the Cell Service (and I could before)?

I open the Tether app and go to TP-Link ID and it shows me connected, only choice is to UNBIND it seems which I did the last time? I can LOGOUT in Tether and log back in with my TP-Link ID and in Wifi it finds the A20. Am I missing something?

I'll connect with Parker again tonight or tomorrow and I guess I'll ask him about it?

@Carl,

We did put back V1 code though? Rebooted, but we never did a flush reset? This is what is show as installed, 1.0.0 Build 20181122 rel.29339(5553).

I'm pretty sure I've done everything needed to allow this? I can reach the A20 using eihter the IP Address or http://tplinkwifi.net as the URL in a browser and enter my TP-Link credentials? Basically I did everything in this link, https://www.tp-link.com/us/support/faq/1366/https://www.tp-link.com/us/support/faq/1366/, well accept for the Tether part as I was already logged in? Like I said, I even did a LOGOFF and LOGON and it didn't help?

This is what shows on the A20:

You'd think if I wasn't logging in wih that set of credentials Tether wouldn't be able to do much, nor on Wifi eiher and tell me in both situations it can't find the device?

@Carl,

Sent you TWO PM's. Can't tell if they were sent or not? No verification, windows just closed?

I can send it e-mail I guess if you didn't get it?

@Carl,

For what it is worth, Parker tested Tether buy unbinding me and used his ID. It worked for him. I then did the unbind and set my account up and bound it. Still fails. Sort of confirms an account problem I guess?

Tough test in my home, very weak cell signal. However, it also will show no device when I switch off Wifi.

@Carl.

Parker nailed it... found I was NOT logged in according to records. Looked at the app and I was NOT... Logged in, works.

Too bad the app didn't tell me that vs. saying it couldn't find a device? I had to look at the 3 line 'hamburger' on the top left and then it showed I wasn't logged in. I think it was always showing as a 'local device' and now it shows as a 'cloud device'. That was probably another indication I wasn't logged in?