T4U problems after 1803 update
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
T4U problems after 1803 update
Model : T4U
Hardware Version :
Firmware Version : 1030.11.503.2016
ISP :
T4U (not sure if V1 - how can I tell?) is only getting 2-3 mbps download speeds, still full 11 mbps up, using Verizon speed test site. Before 1803 update was 100+ mbps down.
I've switched to the slow built-in wi-fi adapter on my PC to limp along at 20 mbps speeds (so problem has to be with the T4U, not local network or internet).
I assume the update must have messed up a setting or some code somewhere but trouble shooting has failed so far - I've tried network resets, both bands, USB2 and USB3 ports.
It's using Realtek driver version 1030.11.503.2016 provided by Microsoft.
The device's event tab shows a possible issue:
Install requested
Device not migrated (Info:Device USB\VID_2357&PID_0101\123456 was not migrated due to partial or ambiguous match.
Last Device Instance Id: SWD\IP_TUNNEL_VBUS\Teredo_Tunnel_Device)
Device configured
Thanks for any suggestions you can provide...
Hardware Version :
Firmware Version : 1030.11.503.2016
ISP :
T4U (not sure if V1 - how can I tell?) is only getting 2-3 mbps download speeds, still full 11 mbps up, using Verizon speed test site. Before 1803 update was 100+ mbps down.
I've switched to the slow built-in wi-fi adapter on my PC to limp along at 20 mbps speeds (so problem has to be with the T4U, not local network or internet).
I assume the update must have messed up a setting or some code somewhere but trouble shooting has failed so far - I've tried network resets, both bands, USB2 and USB3 ports.
It's using Realtek driver version 1030.11.503.2016 provided by Microsoft.
The device's event tab shows a possible issue:
Install requested
Device not migrated (Info:Device USB\VID_2357&PID_0101\123456 was not migrated due to partial or ambiguous match.
Last Device Instance Id: SWD\IP_TUNNEL_VBUS\Teredo_Tunnel_Device)
Device configured
Thanks for any suggestions you can provide...
