No way to disable 5ghz
There's no way in my AX6000 to disable 5ghz, I have a device that will not connect to it but connects to my old router with 2.4 just fine.
I've checked all the options and there's no way to disable it, I'm on the latest firmware, can't do it in SSID 2 or 3 or guest either.
I checked the manual and it says it shold be there, but my page looks different to the manual
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@gazza81 Why would you want to disable it? Let the old device connect on 2.4 and others connect on 5.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@ArcherC8 Nah, it's not in there either.
It turned out this wasn't the problem but it still would be nice to have for troubleshooting.
- Copy Link
- Report Inappropriate Content
@gazza81 Disable the Band steering, that should separate 2.4 and 5.
- Copy Link
- Report Inappropriate Content
by chance do you have a setting for smart connect and is it turned on. If so, turn it off and control each band.
your display looks different than the emulator for that router.
- Copy Link
- Report Inappropriate Content
@ArcherC8 I did a quick search on Band Steering and it seems to be the same as Smart connect. The screenshot shows it enabled, so if the OP disables it he should have separate 2.4 and 5 settings to work with.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 106
Replies: 6
Voters 0
No one has voted for it yet.