Home Network Community > Wi-Fi Routers > Trying to connect Wyse camera to IoT network
< Wi-Fi Routers

Trying to connect Wyse camera to IoT network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Trying to connect Wyse camera to IoT network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Trying to connect Wyse camera to IoT network
Trying to connect Wyse camera to IoT network
2024-08-25 18:38:27
Model: Archer AX21  
Hardware Version:
Firmware Version: current

Just got this router and I'm trying to connect an old Wyse camera v1, that had been disconnected for awhile. The camera needs 2.4G. I activated the IoT network, connected my iPad to that network and stepped through the add device setup on the Wyxe app several times, but no luck. Ideas?

 

Thanks in advance

  0      
 
  0      
 
#1
Options
3 Reply
Re:Trying to connect Wyse camera to IoT network
2024-08-25 19:16:16

  @GizmoJojo 

 

I have had several Wyze cams die on me. There is a procedure to reinstall the Wyze cam firmware which you can find on the Wyze site. Some recoveed and others did not. I still have 4 Wyze cams working but been replacing them with another vendor.

 

First I would try to see if you can get it to connect to some other 2.4G network

  0  
  0  
#2
Options
Re:Trying to connect Wyse camera to IoT network
2024-08-29 16:11:53

Hey @GizmoJojo 

 

Welcome to the community!

 

If you can, test whether you can connect any other devices to the IoT network. If other devices can connect, and assuming you've already reset the Wyze device in an attempt to reconfigure it with the network, this may indicate the Wyze device is encountering some network connectivity troubles. If so, I'd recommend contacting Wyze to see what they would recommend.

Check out the Latest: Getting Started with EasyMesh and TP-Link New Tablet Mode for the Tapo App Comparing the Latest Tapo Doorbells
  0  
  0  
#3
Options
Re:Trying to connect Wyse camera to IoT network
2024-08-31 00:52:04

  @GizmoJojo 

 

just had one of my Wyze cameras stop connecting. Had to delete it from the Wyze app and add it back in to get it to work. 

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 523

Replies: 3

Related Articles
 IoT network + smart connect
574 0
 Laptop Does Not See Powerline Network When Trying To Connect
1459 0
 “No Internet Connection” when trying to connect to 2.4GHz network.
2898 0
 Main Network to IoT Network
2005 1
 IoT Network and Guest Network
46 0
 I couldn't connect some IoT devices, even in the 2.4GHz network
3008 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.