AXE75 (AXE5400) / RE315 no IoT WLAN via mesh, router only

RalfK

2024-08-09 20:34:06 - last edited 2024-08-09 20:35:07

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-08-09

AXE75 (AXE5400) / RE315 no IoT WLAN via mesh, router only

2024-08-09 20:34:06 - last edited 2024-08-09 20:35:07

Tags: #EasyMesh #OneMesh #Roaming

Model: Archer AXE75

Hardware Version: V1

Firmware Version: 1.2.1 Build 20240607 rel.74966(5553)

Hello,

I have an Archer AXE75 and two RE315 extenders. The extenders are connected to the AXE75 via WLAN, the mesh works in principle. I can also see via WifiInfoview that the SSIDs are being propagated by the extenders.

Now I have activated the IoT network only for 2.4 Ghz, WPA2-PSK (because of older devices) and a different SSID. The problem I have here is that the IoT is not propagated via the extenders. It is only provided by the router. This does not help me now, because the IoT are a bit too far away from the router.

What can be done so that the IoT is also provided via the RE315? All devices have the latest firmware and have already been restarted.

1 Reply

terziyski

LV7

2024-08-12 13:02:49

Posts: 7141

Helpful: 5354

Solutions: 1220

Stories: 7

Registered: 2013-10-12

Re:AXE75 (AXE5400) / RE315 no IoT WLAN via mesh, router only

2024-08-12 13:02:49

@RalfK

The scope of Easymesh doesn't include the IoT and Guest networks. These features are under future considerations according to several threads - details.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".

AXE75 (AXE5400) / RE315 no IoT WLAN via mesh, router only

AXE75 (AXE5400) / RE315 no IoT WLAN via mesh, router only

Information

Voters 0

Tags