One Mesh not an option on RE450

2024-05-30 00:07:06 - last edited 2024-05-30 00:19:35

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2019-12-07

One Mesh not an option on RE450

2024-05-30 00:07:06 - last edited 2024-05-30 00:19:35

Model: RE450

Hardware Version:

Firmware Version:

I have an Archer AX21 and already had an RE450 extender and created a One Mesh with those two.

Got another RE450 and during setup, it does not give me the option to select One Mesh. Even after it's setup, One Mesh doesn't show as an option.

what gives?

Do I need to undo the Mesh and create again? It won't even pop up the new device as a One Mesh option in the router settings.

1 Reply

LV7

2024-06-02 20:54:21 - last edited 2024-06-02 20:58:03

Posts: 6975

Helpful: 5190

Solutions: 1128

Stories: 7

Registered: 2013-10-12

Re:One Mesh not an option on RE450

2024-06-02 20:54:21 - last edited 2024-06-02 20:58:03

Make sure you're with the latest FW release for RE450. When you do that try the WPS method for adding the RE5450 to the OneMesh - video.

If this method doesn't work either try this video guide.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".