Cannot access ax11000 router via tether app

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Cannot access ax11000 router via tether app

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Cannot access ax11000 router via tether app
Cannot access ax11000 router via tether app
2023-11-09 05:58:45
Model: Archer AX11000  
Hardware Version:
Firmware Version:

Originally was able to access Ax11000 router via Tether app. 

 

Updated firmware but then forgot administrator pw and reset the router pw. 

 

Re set up everything and enabled remote management. 

 

First few hours(?) was able to access ax11000 router via tether app. 

 

Unable to access for the last entire day. Cloud device says offline but can access cameras connected to the router. 

 

Was I supposed to potentially delete the old cloud device that claims it's the same ax11000 router (original)?  Is that interfering with it? 

 

Please help as I want to be able to access the router and be able to manage this remotely via the tether app. 

  0      
  0      
#1
Options
3 Reply
Re:Cannot access ax11000 router via tether app
2023-11-10 08:45:08

  @Routerkc 

 

AX11000 supports password recovery in case you forgot the local management password: Advanced=>System=>Administration=>Password Recovery

To manage the router with the tether app, you should also bind your TP-Link ID with the router:

 

faed2fbe2af044debb2d79a0eafd7279

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#2
Options
Re:Cannot access ax11000 router via tether app
2023-11-10 12:06:17

  @terziyski 

 

It is bound cause it worked for a few hours and then stopped. 

 

I'm just not sure why it isn't working now. 

 

Like should I do a full test, unbind and or delete all instances and see if that works? 

 

 

  0  
  0  
#3
Options
Re:Cannot access ax11000 router via tether app
2023-11-10 21:17:50 - last edited 2023-11-10 21:27:58

  @Routerkc 

 

Yes, you could do a full test - unbind, delete all instances then bind to add it again.

Here's the AX11000 guide for TP-Link cloud service management.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#4
Options