AX11000 router with EAP660 HP Access Points

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AX11000 router with EAP660 HP Access Points

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AX11000 router with EAP660 HP Access Points
AX11000 router with EAP660 HP Access Points
2021-10-27 00:58:13 - last edited 2021-10-29 08:02:50
Model: Archer AX11000  
Hardware Version:
Firmware Version:

I am setting up a new home network.  The home has been wired for several POE access points.  I have used Omada access points before and like them a lot and plan to use again.  Can I use the Omada EAP660 HD access points with the TP-Link AX11000 router? I would like t use the built-in WiFi capabilities of the AX1100 and be able to seamlessly roam through out the house.  Will the AX11000 and EAP660 HDs work together to enable seamless roaming?  Thanks for your Help 

  0      
  0      
#1
Options
1 Accepted Solution
Re:AX11000 router with EAP660 HP Access Points-Solution
2021-10-27 18:45:29 - last edited 2021-10-29 08:02:50

@DT95 

 

Hello,   The Archer AX11000's OneMesh feature is not compatible with the business class EAPs.  However the EAPs using the Omada controller can incorperate a Mesh feature between themselves and other Omada products.  In fact you could use one of these Omada routers and then control all of the devices in the Omada app or controller software.  If you do use them with the Archer AX11000 you might want to disable the wireless of the Archer AX11000 so you do not create any interference points between the Omada and the Archer devices.  

Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:AX11000 router with EAP660 HP Access Points-Solution
2021-10-27 18:45:29 - last edited 2021-10-29 08:02:50

@DT95 

 

Hello,   The Archer AX11000's OneMesh feature is not compatible with the business class EAPs.  However the EAPs using the Omada controller can incorperate a Mesh feature between themselves and other Omada products.  In fact you could use one of these Omada routers and then control all of the devices in the Omada app or controller software.  If you do use them with the Archer AX11000 you might want to disable the wireless of the Archer AX11000 so you do not create any interference points between the Omada and the Archer devices.  

Recommended Solution
  0  
  0  
#2
Options
Re:AX11000 router with EAP660 HP Access Points
2021-10-28 04:59:39

@Carl Thanks very much for the information

  1  
  1  
#3
Options