Pre-Release Firmware for Archer BE550 and BE9300

Pre-Release Firmware for Archer BE550 and BE9300

Pre-Release Firmware for Archer BE550 and BE9300
Pre-Release Firmware for Archer BE550 and BE9300
2023-11-03 00:20:55 - last edited 2024-08-23 23:28:33
Model: Archer BE550  
Hardware Version: V1
Firmware Version:

Post-release, our engineering and development teams are always looking for areas to optimize and improve our network devices – based on the reports from a few users, we have developed a beta firmware that aims to increase the overall stability of your device’s network connections and potentially limit any unintended reboots you may have experienced.

This pre-release firmware can be installed on the Archer BE550 and BE9300. Before installing the pre-release firmware, ensure you have installed the most up-to-date firmware from your model’s download page (BE550, BE9300). After confirming or installing the latest official release, you may install the pre-release firmware using the link for your model below.

Please Update to the Most Recent Official Firmware, as Updates have been pushed in the form of a 1.0.4 update.

Please Note: This firmware is considered an early access version of software aimed at enhancements for your product.  Any unforeseen or negative experience should be reported to TP-Link Support as soon as possible so these concerns can be addressed in the final release and forwarded to our engineering teams. This pre-release software should be considered use at your own risk.

Archer BE550 V1 1.0.3 20231027

Archer BE9300 V1 1.0.3 20230922

 

Please Update to the Most Recent Official Firmware, as Updates have been pushed in the form of a 1.0.4 update.

Make Sure to Provide Your Feedback on the Pre-Release Firmware in the Comments Below!

 

Please use the following questions to guide your feedback regarding the pre-release firmware:

Network Configuration:

  • What wired and wireless devices are connected to the router?
  • How is your router connected to the Internet? Do you have any network switches or servers on your network that may have unusual data usage or traffic?

Experience:

  • What concerns or unexpected behavior did you encounter?
  • How Frequently does the behavior occur? How much time between occurrences?
  • Have you noticed any patterns in times, devices, or data usage that seem to trigger or increase the frequency of the behavior?

Pre-Release Firmware

  • Did the Pre-Release or Official firmware address any concerns that you had?
  • Did you experience any unforeseen concerns while using this pre-release firmware?
  0      
  0      
#1
Options