This Article Applies to:

Archer BE550 V1 1.1.1 Build 20250306

We're pleased to offer a new pre-release firmware for the Archer BE550, version 1.1.1 Build 20250306, for testing in your network. This update aims to enhance overall system stability and address some issues reported by our users. Upgrading to this version is highly recommended.

Modifications:

• Optimized the overall system stability and performance.
• Fixed an issue where specific 10/100Mbps devices are unable to access the internet via the 2.5G LAN ports.
• Fixed an issue where devices cannot access the internet when added to the WireGuard VPN Client List.

Note: This pre-release version can be downgraded to the previous official version.

Firmware Download:

Before Upgrading

(1) Please be sure you have read the Beta Test Agreement before upgrading the pre-release firmware!

(2) For insurance's sake, saving a copy of the router Backup Config file is always recommended before upgrading or downgrading.

(3) You may use the following guide to upgrade the firmware of your router: How to Upgrade the Firmware on the TP-Link Wi-Fi Routers.

(4) This pre-release firmware for the Archer BE800 V1 can be applied to all versions (EU/US/CA/AU/SG/etc.).

(5) US Users: Pre-release and Beta firmware should be used at your own discretion. We cannot guarantee the functionality of features or technical support for Pre-Release or Beta Firmware. 

Direct Firmware Download Link

Additional Information

As always, we value your feedback. If you happen to encounter an issue during or after the router firmware upgrade, please feel free to comment below with the following information. Your input helps us continue to improve and provide the best possible products and support.

• Provide a detailed network layout, including how the devices are connected, especially if there are EasyMesh satellite devices.
• Provide a detailed description of the issue and as much information as possible regarding the specific conditions that seem to trigger the problem.