New Archer BE550 constant disconnects
So I got this new router and I am getting constant disconnects. Not just where my devices say no internet but where my devices get totally disconnected from the router and have to reconnect. Chatted with tech support who told me to change DNS primary and secondary to 8.8.8.8 and 8.8.4.4 respectively (seems to be a common response which baffles me cuz that only changes it to Google's DNS servers when it's really a router problem). That helped a little but the disconnects are back. Then was told to disconnect the USB drive and see if that helps. No still the same. I get an email this morning telling me this tech support guy is going out of town beginning tomorrow and will be back Oct 6. Which is why I'm here. It's not my modem cuz I just got a new modem from Spectrum and the problem remains with both modems. I realize this is a new router on the first firmware version but right now it's unusable becuase of the lack of reliablity.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thanks for the added information and feedback, I will let the teams know and keep an eye out for updates.
For your second behavior, it almost sounds like this is a setting or route conflict,
Try disabling TWT (Target Wake Time) to see if there is a difference.
I would ensure that you are not in a Dual NAT configuration.
On the affected devices, try disabling Private Addressing.
I would also try changing your DNS server to a common service, such as Google or Cloudflare.
Does this behavior exist on your wired devices? Does the behavior exist on all your wireless networks? Are there devices which it seems to happen to more often?
Lastly, Does the behavior occur across your entire network at one time?
- Copy Link
- Report Inappropriate Content
@Riley_S Apologies, I can't test anymore. I returned it since I was still in the return windows. Thanks for your help and suggestions though!
- Copy Link
- Report Inappropriate Content
@DanDaredum I was having simlar problems with the newly installed BE550 I put in yesterday to replace a dead 3.75 year old Archer AX50.
I noticed my WiFi signal would drop out and disappear, as if the WiFi was rebooting every 10 minutes or so. In the mean time, I would not be able to access the web management portal, even though I was hard wired straight into the router.
I also noticed that when I was able to reach the management page, it would show that the WAN cable was unplugged, even though I was getting some Internet access from either the recently reconnected WiFi or from the Ethernet connected devices.
After combing through a lot of community forums and posts, I found something that actually prevents the WiFi from randomly rebooting every 10 to 15 minutes:
Turn off MU-MIMO and only have OFDMA on. Or have them both off. This can be found in the Advanced-Wireless section.
The logs are not helpful on the router cause I noticed after the reboot they either don't show the crash, or it gets wiped from the cache.
As of now, the WiFi hasn't rebooted or cut out since I have done so, and it has been pretty soild for the past 10 hours or so.
Edit: I actually REALLY wanted MU-MIMO (it's been available on routers since 2016), so I tried another setting in which I enabled MU-MIMO, and turned off EasyMesh. Happy to report that the wireless network has been steady for the last hour since doing so.
- Copy Link
- Report Inappropriate Content
Hi,
Has this issue been resolved?
Just installed BE550 and it keeps losing the Internet every 5-7mim. I have changed the DNS but still the same issue.
What's going on with TP Link products? There is no proper testing and you are releasing unstable products to the public.
Downgraded and upgraded but no luck.
- Copy Link
- Report Inappropriate Content
@Maximus27 Did a hard reset and no more disconnects. It's a shame a company like Tp-link cannot provide stable products and customers have to troubleshoot themselves to fix buggy out of the box products.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Radster hey, did you perform a hard reset after the latest firmware update?
I did that and it's working fine without any issues.
- Copy Link
- Report Inappropriate Content
@Radster yeah when I replied to this last time, 1.0.7 was the firmware I was on.
1.0.8 had issues, and the latest is now 1.0.9. Got to definitely get on that firmware version.
there is another thread floating around here discussing issues with MU-MIMO on 1.0.8
- Copy Link
- Report Inappropriate Content
@Maximus27 Hi ....I'm not sure what the latest firmware is, but my unit when I go to system firmware update says I have latest?
Do you know what the latest version should be?
Also when you do a hard reset, are you wiping all setting that are on the router back to factory?
- Copy Link
- Report Inappropriate Content
Hi
1.0.8 is the latest I think.
Yes wire to factory settings and then setup from start. I haven't faced any issues after reset
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 5113
Replies: 29
Voters 0
No one has voted for it yet.