1.3.0 Ethernet LAN Blocked
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Upgraded to 1.3.0 about 24 hours ago, and for the last 2 hours I've been fighting to get anything at all online.
After some troubleshooting I think I discovered the issue. I use a Linux server as a pi-hole, and what appears to happen is with that much traffic going to the Ethernet LAN, the Deco M5 completely blocks the Ethernet LAN link.
Ethernet Backhaul from the other Decos drop too, and all my hardwired devices can't get Internet or even a DHCP address! Since all the DNS traffic was going to the pi-hole even the wireless devices all quit working.
For now I've set the DNS servers to default, so I'm getting the upstream server IPs when I check settings on my devices. I'll monitor and see if it does this again without the pi-hole, but I have to say this is a SERIOUS bug in this software. To take down the entire wired LAN like that is beyond heavy handed. If that one device was quarantined as a potential problem, sure that I would understand, but this breaks so much stuff to do this.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thank you for the feedback i will forward this over to our software team. Please let us know if the Roku is fixed.
- Copy Link
- Report Inappropriate Content
Carl wrote
Thank you for the feedback i will forward this over to our software team. Please let us know if the Roku is fixed.
The Roku is doing a little better. It will connect after being prodded, but not automatically. Before no amount of retry attempts would get it to connect for hours or days at a time (it would then occasionally connect to be kicked off shortly afterwards). It will then get through a show or two now, it was impossible before.
This is still far from ideal. With Deco software 1.2.4 or on my TP-Link AC1200 or C7 or the ATT Gateway, it connects first time, every time with no interruption. So still something wrong even in this beta version.
- Copy Link
- Report Inappropriate Content
Thank you I will have my Engineering team reach out to you directly regarding this matter to see if with your help they can see in a real world enivorment if they can figure out what is causing this issue and resolve it once and for all.
- Copy Link
- Report Inappropriate Content
is this an M5 only issue or does it also affect M9 - common firmware base? I started have issues with M9 significantly throttling bandwidth after upgrading to 1.2.8 Build 20190403 Rel. 43515 on June 18th. Speeds dropped from 789/647 on June 15th to 50/200-300 starting June 18th. Swapping out Deco for Eero and the speeds are restored. Just posted on another thread, but didn't think about a potential upgrade coorelation until reading this thread.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 6743
Replies: 34
Voters 0
No one has voted for it yet.