Deco
𝐂𝐨𝐧𝐧𝐞𝐜𝐭𝐢𝐧𝐠 𝐰𝐢𝐭𝐡 𝐩𝐞𝐨𝐩𝐥𝐞 𝐨𝐧 𝐒𝐢𝐧𝐠𝐚𝐩𝐨𝐫𝐞 𝐀𝐢𝐫𝐥𝐢𝐧𝐞𝐬 𝐜𝐚𝐧 𝐛𝐞 𝐝𝐨𝐧𝐞 𝐢𝐧 𝐦𝐮𝐥𝐭𝐢𝐩𝐥𝐞 𝐰𝐚𝐲𝐬, 𝐰𝐡𝐞𝐭𝐡𝐞𝐫 𝐲𝐨𝐮'𝐫𝐞 𝐥𝐨𝐨𝐤𝐢𝐧𝐠 𝐭𝐨 𝐜𝐨𝐧𝐭𝐚𝐜𝐭 �
RoamingFeature RequestHomeShieldBackhaul Method
By
Devil7845
0Helpful
4Views
𝐂𝐨𝐧𝐧𝐞𝐜𝐭𝐢𝐧𝐠 𝐰𝐢𝐭𝐡 𝐩𝐞𝐨𝐩𝐥𝐞 𝐨𝐧 𝐒𝐢𝐧𝐠𝐚𝐩𝐨𝐫𝐞 𝐀𝐢𝐫𝐥𝐢𝐧𝐞𝐬 𝐜𝐚𝐧 𝐛𝐞 𝐝𝐨𝐧𝐞 𝐢𝐧 𝐦𝐮𝐥𝐭𝐢𝐩𝐥𝐞 𝐰𝐚𝐲𝐬, 𝐰𝐡𝐞𝐭𝐡𝐞𝐫 𝐲𝐨𝐮'𝐫𝐞 𝐥𝐨𝐨𝐤𝐢𝐧𝐠 𝐭𝐨 𝐜𝐨𝐧𝐭𝐚𝐜𝐭 �
RoamingFeature RequestHomeShieldBackhaul Method
By
Devil7845
0Helpful
17Views
Early AccessPre-Release: Enhancing Satellite Deco Network Stability with Deco BE11000/BE63 V2/2.6 1.1.7
Hey Everyone, A Pre-Release Firmware for Deco BE11000 and Deco BE63 is now available.This version improves roaming performance, optimizes the 2.4GHz backhaul, and more. This Article Applies to: Deco B
Firmware UpdateWi-Fi 7RoamingBackhaul Method
By
Ryan
Ryan0Helpful
23Views
Hi all, I have a small business where I use a service called AudioFetch. For those not familiar with it, it is a device which is fed an audio feed and it streams it over an app to devices on a local n
Client DevicesRoaming
1Helpful
216Views
It's long but I wanted to try to provide all the info out so hopefully it covers all bases for advice. Thank you in advance! Before moving I had the older AT&T mesh devices (AirTies 4970) that I bough
Access Point ModeBandwidth Control/QoSRoamingBackhaul MethodConnection
1Helpful
285Views
Since I updated my 3 Deco X55 mesh network to the firmware listed on my post, when I carry my year-old Windows 11 Lenovo Yoga 6 laptop around the house it does not connect to the closest unit, but rem
Firmware UpdateClient DevicesRoaming
0Helpful
155Views
I'd like to suggest for the ability for the Deco app to allow us to assign devices to a specific access point rather than roaming. Rebooting my decos throw all my devices (specific static non moving)
RoamingClient DevicesFeature RequestAccess Point ModeSuggestion
1Helpful
282Views
I have a mesh network comprised of 3 XE75 Pro nodes and 1 Deco M5 node. The "Main" node is an XE75 Pro. Randomly, the Main node will stop accepting connections on the 5GHz frequency. It still accepts/
Roaming5GHz
By
navigator48
navigator481Helpful
171Views
I recently got Deco E4. I only have 2 units. The router and the satellite. I have connected the router to my modem. Set it up. Works fine, internet is great. Just 2 days later it disconnected. I resta
Deco LabClient DevicesRoaming
By
d3la5
0Helpful
217Views
I have a network running with a Dec x55 as router and 2 satellites hard-wired to another floor and a detached building. But I have gotten access to a Fortigate device and would like to switch over to
Access Point ModeClient DevicesRoaming
0Helpful
325Views