BaenzLV2Online
Following: 0Followers: 6
Forums/ 5G/4G Wi-Fi Routers/MiFi
2020-08-18 10:08:55
Re:Archer MR600(EU) V1 - BETA Firmware - Allowing selection of 4G+bands for Archer MR600 manually
Keep in mind, installing the beta firmware will leave your router open to vulnerabilities, that have only been fixed in a later firmware.
0HELPFULS
Forums/ 5G/4G Wi-Fi Routers/MiFi
2020-08-13 15:40:06
Re:Archer MR600 Antenna
@tnabeel The MR600 has two female SMA connectors.
0HELPFULS
Forums/ 5G/4G Wi-Fi Routers/MiFi
2020-08-04 09:10:22
Re:Van use
@Overdale It should work, but make sure that it is a stabilized 12.0V supply and doesn't directly apply 13.8V from the battery.
0HELPFULS
Forums/ 5G/4G Wi-Fi Routers/MiFi
2020-07-23 19:44:10
Re:Archer MR600(EU) V1 - BETA Firmware - Allowing selection of 4G+bands for Archer MR600 manually
Yes, the software support is dissapointing. Firmware bugs that I've reported in January hadn't been fixed in the June firmware update either.
0HELPFULS
Forums/ 5G/4G Wi-Fi Routers/MiFi
2020-07-19 14:24:21
Re:Check if the antennae are both working
Situation here is B20 is strong but slow (-80 dBm, 5 Mbit/s), B3 weak but fast (-101 dBm, 75 Mbit/s). But with a single antenna it doesn't make use of band 3 at all and always choses B20.
0HELPFULS
Forums/ 5G/4G Wi-Fi Routers/MiFi
2020-07-19 09:08:14
Re:Check if the antennae are both working
At least for transmitting it is only using one antenna in my case, even if both are attached (confirmed with spectrum analyzer and h-field probe). When both antennas are connected, the MR600 shows...
0HELPFULS