Hi @cTsitouridis, One other suggestion, there seems to be a bug / strange behavior in the version 5.0 firmware. For the 5.8GHz radio, use only the 80 MHz setting and not the 20/40/80 setting. Many of...

Hi @mackworth, Oh wow, 3 stories? Like 30 feet? That's way too high. I'm not sure how feasible it will be for you, but I would try 20' and then 10' and see if either of these work better. When I...

Hi @PBGBBB2020, Glad to hear things are looking up! "So it looks like it was the BW causing the problem." Generally speaking, you should always use 20MHz only for 2.4GHz because the spectrum is so...

Hi @mackworth, I have two EAP225-OD's myself, both connected via MESH for outdoor signal in my yard. I have found the transmit distance of the EAP225-OD is not terribly far and it will not penetrate...

Hi @Egis, Using a variety of internet speed tests (I have Gigabit FIOS -- FTTH) such as Ookla SpeedTest, SpeedSmart, and Fast.com, I routinely see application-level speeds of 350-550 Mbit/sec DL & UL...

Hi @PBGBBB2020, I easily get over 350 Mbit/s DL & UL from my EAP225V3 & EAP245V3 on the 5.8GHz band (I have gigabit FIOS). Some things to check: 1) Make sure band steering is OFF. Use separate SSID's...