@Kevin_Z Thank you for opening this thread, hopefully we'll get the problems solved. Regarding point 3: 1. What if you refresh the Client list, will those devices disappear? No, refreshing the...

@Kevin_Z Again, thank you for your quick response. 1) The time is exact (I measured it with my watch). 2) I'd love to give you a screenshot, but I can't - the "zeroing" was visible for a second or...

@Kevin_Z The WPA3/WPA2 issue has gone away, hopefully for good, but I have another thing to report. I connected an RE600X range extender to the AX11000 in OneMesh. The first thing that I noticed was...

@far1 Such things could be modem related. You don't happen to be using a Technicolor modem by any chance? When I did, I had all sorts of weird things going on with my AX11000, but everything sorted...

@Kevin_Z Thank you for your quick response, much appreciated. Actually no, I was using WPA3 + WPA2, and the clients always correctly chose their preferred protocol - my AX200 units (a PC and laptop)...

@Kevin_Z One thing that I've noticed... Previously, on the beta firmware, if I chose WPA3 + WPA2 encryption for a single given band, the clients connected to it would automatically choose their...