@gkatz 1. In access point mode, you can connect the Deco units at will, including a star network. 2. In AP mode, the Deco system will still radiate the Wi-Fi signal like in Router mode. The...

@SamyKn As per your description, all the units are working in AP mode. Then every Deco unit should obtain an IP address from the Router via DHCP. And the Router should display all the units....

@JoeBlack12 It could be a DNS issue. Please make sure your phone is connected to Deco's Wi-Fi network, then follow the FAQ link below to change Deco's DNS server to 8.8.8.8 for a try....

@Vindel @Alan062 The new features for Deco M4 and M9 Plus will release soon after Deco M5's public release. @Dayfat Thanks for pointing the spelling error. Will fix it in next release. @EnsignRam If...

@thefunkygibbon As described in the thread, the new firmware is partially released currenctly. But don't worry, it will soon release to public within a week. As for ZigBee, we recommend Deco M9 Plus...

@SamyKn What's the LED status on the other Deco unit which is not listed in the arp table? Try to connect a PC to the Ethernet port of the remote unit, then try to ping your router. After that, check...