Eric_Le_GrompfLV2Online
Following: 0Followers: 1
Forums/ Feature Request (Deco)
2023-03-30 18:48:04
[Bug report] test of x50 in router mode
Hello, today, i switched my master X50 deco into router mode in IPv4 and in IPv6 behind my ISP router. Bug : X50 gets my fd02::/64 network and associates with its own fd02::xxxx:xxxx:xxxx:xxxx...
1HELPFULS
Forums/ Deco
2023-03-27 13:51:59
Re:can secondary router be attached to Deco?
@VladimirAlexiev Try "client mode" on dlink or archer, and keep deco as your network needs it to be (router or AP it is the same) : two APs cannot naturally communicate with each other unless being...
0HELPFULS
Forums/ Deco
2023-03-22 11:38:52
Re:Deco network - xbox series s double nat
@Dinreko Did you restart or renew all the IPs on all your devices ? Switching to AP mode will remove the deco's private address range (and the DECO's router too). You'll be on your modem/router...
1HELPFULS
Forums/ Deco
2023-03-22 10:46:25
Re:can secondary router be attached to Deco?
@VladimirAlexiev OKAY, through your last post i see a better picture of it. It seem to be at a lower level than i firstly expected. There's not established physical link. first DECO and Archer are...
0HELPFULS
Forums/ Deco
2023-03-22 10:22:02
Re:Deco network - xbox series s double nat
@Dinreko This is not in the DECO but in your ISP modem/router that you'll find this setting (ISP documentation or data is required). If you don't know how to do the job safely : please stick to the...
0HELPFULS
Forums/ Deco
2023-03-22 10:14:08
Re:How do you allow an FTP transfer from Different Wifi using Deco
@Dualrifle Hello, As regard FTP, port forwarding needs to take account of the age of FTP. There's one control port (21) and one data port (one among the high ports). The data port is either...
1HELPFULS