C225 Firmware update
Hi,
I have C225 v2 running firmware v1.0.7, i check for updates in the app and it says its running the latest version.
The support page says v1.0.9 is the latest version and i see older threads saying they are running v1.0.10.
How to do i update it to the latest version?
Regards
Joe
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi All,
The latest official firmware(v1.0.11) is fully rolled out now, and you can update it via the Tapo app.
How to update the firmware of the Tapo devices on the Tapo App?
If you can't see the new firmware on the Tapo app, please ensure your smart device is online, and you can reboot your router and the smart device for a try.
Best Regards
- Copy Link
- Report Inappropriate Content
Hi,
Currently, the new firmware of the Tapo C225 is rolling out, and some cameras can't detect the new firmware. It's normal to see your firmware version is v1.0.7.
If there is no problem with the camera when using firmware v1.0.7, it's suggested to wait for the new official firmware release to your camera.
Best Regards
- Copy Link
- Report Inappropriate Content
Hi,
I want to use Onvif with my NVR which doesn't work with v1.0.7.
The release notes for v1.0.9 say " Improved compatibility with NVRs using Onvif protocol" and the onvif website confirmed compatibility with v1.0.9.
The release date for v1.0.9 was 2024-05-30, how long should it take for the C225 to get the update?
Regards
Joe
- Copy Link
- Report Inappropriate Content
Solla-topee wrote
Hi,
Currently, the new firmware of the Tapo C225 is rolling out, and some cameras can't detect the new firmware. It's normal to see your firmware version is v1.0.7.
If there is no problem with the camera when using firmware v1.0.7, it's suggested to wait for the new official firmware release to your camera.
Best Regards
I had sent you a private message about the new firmware. Awaiting your reply.
- Copy Link
- Report Inappropriate Content
Hi,
The new firmware has been pushed to your camera. You can update it via the Tapo app when your camera is online and then check if it helps.
Best Regards
- Copy Link
- Report Inappropriate Content
Hi,
Sorry for that I do not have the information about when the new firmware will be fully rolled out. If you want to try the new beta firmware, please send me(@Solla-topee) the forum ID 711348+camera's MAC address via a private message.
Best Regards
- Copy Link
- Report Inappropriate Content
Hi All,
The latest official firmware(v1.0.11) is fully rolled out now, and you can update it via the Tapo app.
How to update the firmware of the Tapo devices on the Tapo App?
If you can't see the new firmware on the Tapo app, please ensure your smart device is online, and you can reboot your router and the smart device for a try.
Best Regards
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 453
Replies: 8
Voters 0
No one has voted for it yet.