Home

Forums

Stories

Knowledge Base

Smart Home Community > All Threads > 2/4 devices "can only be controlled locally"

< All Threads

2/4 devices "can only be controlled locally"

Isaverandom

2024-09-02 17:10:30 - last edited 2024-09-14 02:41:28

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-09-02

2/4 devices "can only be controlled locally"

2024-09-02 17:10:30 - last edited 2024-09-14 02:41:28

Tags: #Device Connectivity #Installation

Model: Tapo C100

Hardware Version:

Firmware Version:

My two out of 4 tapo devices "can only be controlled locally". This issue continues to occur after numerous resets/reboots. Work has advised me to not change my routers DNS as I do privacy sensitive work from home.

What is the reason for this selective issue? And is there any other way to fix this? I can't add these cameras to my care membership either, so there's no way to see what's going on when I'm not at home.

1 Accepted Solution

Solla-topee

2024-09-03 08:35:37 - last edited 2024-09-14 02:41:28

Posts: 14144

Helpful: 2470

Solutions: 2141

Stories: 8

Registered: 2020-05-19

Re:2/4 devices "can only be controlled locally"-Solution

2024-09-03 08:35:37 - last edited 2024-09-14 02:41:28

@Isaverandom

Hi,
You can refer to the instructions below to troubleshoot the reported issue.
What to do if I can't control my Tapo cameras on the Tapo app?

Generally, if your camera is connected to the Wi-Fi network but shows local only, it may be the camera disconnected to the internet or our cloud server. Below are some more tips on the reported issue.
1. Ensure all your devices are connected to the same Wi-Fi network. If other Tapo devices that can be controlled remotely connect to another Wi-Fi network, you can switch the camera's connection(reset and reconfigure it to connect to the new Wi-Fi network) for a try.

2. Connect the camera to another Wi-Fi network if there is one.

If your case is solved, it would be appreciated if you could share your experience.

Best Regards

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.

Recommended Solution

1 Reply

Solla-topee

2024-09-03 08:35:37 - last edited 2024-09-14 02:41:28

Posts: 14144

Helpful: 2470

Solutions: 2141

Stories: 8

Registered: 2020-05-19

Re:2/4 devices "can only be controlled locally"-Solution

2024-09-03 08:35:37 - last edited 2024-09-14 02:41:28

@Isaverandom

Hi,
You can refer to the instructions below to troubleshoot the reported issue.
What to do if I can't control my Tapo cameras on the Tapo app?

2. Connect the camera to another Wi-Fi network if there is one.

If your case is solved, it would be appreciated if you could share your experience.

Best Regards

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.

Information

Helpful: 0

Replies: 1

2/4 devices "can only be controlled locally"

2/4 devices "can only be controlled locally"

Information

Voters 0

Tags