Home

Forums

Stories

Knowledge Base

Smart Home Community > All Threads > SanDisk microSD Card 32GB not accepted by device

< All Threads

SanDisk microSD Card 32GB not accepted by device

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

SanDisk microSD Card 32GB not accepted by device

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Fayiz_Ferosh

2024-05-18 12:02:41 - last edited 2024-06-07 09:02:04

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-05-18

SanDisk microSD Card 32GB not accepted by device

2024-05-18 12:02:41 - last edited 2024-06-07 09:02:04

Tags: #Recording

Model: Tapo C200

Hardware Version: V3

Firmware Version: 1.3.13

The camera is not accepting the microSD card which meets all specified standards.

My SD Card: SanDisk Ultra microSDXC UHS-I Card 32 GB

The following error message pops up when formatting: "This microSD card seems to have an abnormal expansion capacity which may put your data at risk. Replacing the microSD card is recommended."

Kindly help me resolve this issue since I bought this microSD card specifically for this camera and it can't be replaced.

Attaching screenshot from Tapo app:

Also attaching microSD card packet photo for further clarification:

1 Accepted Solution

Solla-topee

2024-05-20 10:39:45 - last edited 2024-06-07 09:02:04

Posts: 13704

Helpful: 2368

Solutions: 2035

Stories: 8

Registered: 2020-05-19

Re:SanDisk microSD Card 32GB not accepted by device-Solution

2024-05-20 10:39:45 - last edited 2024-06-07 09:02:04

@Fayiz_Ferosh

Hi
If your microSD card cannot be recognized or cannot be formatted, here are some suggestions:
Note: Ensure your camera firmware and app version are up-to-date before you try the suggestions. Before initialization, remember to back up important files.

1. Turn off the camera, and remove and re-insert the SD card several times. Then turn on the camera and check if the SD card can be recognized.

2. Clear the app cache and format the SD card in the Tapo APP again

3. Verify the status of your microSD card. Insert the card into a computer with an SD card reader to see if it is recognized. Test the card with third-party software such as H2testW to ensure the SD card is good. Here is an instruction to verify an SD card, and please send me a picture of the test results.

4. Try a different SD card if you have one.

For detailed troubleshooting, please refer to the instructions: What should I do if the SD card cannot be formatted/recognized?

Best Regards

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.

Recommended Solution

1 Reply

Solla-topee

2024-05-20 10:39:45 - last edited 2024-06-07 09:02:04

Posts: 13704

Helpful: 2368

Solutions: 2035

Stories: 8

Registered: 2020-05-19

Re:SanDisk microSD Card 32GB not accepted by device-Solution

2024-05-20 10:39:45 - last edited 2024-06-07 09:02:04

@Fayiz_Ferosh

1. Turn off the camera, and remove and re-insert the SD card several times. Then turn on the camera and check if the SD card can be recognized.

2. Clear the app cache and format the SD card in the Tapo APP again

4. Try a different SD card if you have one.

For detailed troubleshooting, please refer to the instructions: What should I do if the SD card cannot be formatted/recognized?

Best Regards

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.

Information

Helpful: 0

Replies: 1

SanDisk microSD Card 32GB not accepted by device

SanDisk microSD Card 32GB not accepted by device

Information

Voters 0

Tags