Home

Forums

Stories

Knowledge Base

Smart Home Community > All Threads > Tapo C310 fail pairing

< All Threads

Tapo C310 fail pairing

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Tapo C310 fail pairing

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Bripoch

2024-05-06 13:49:43 - last edited 2024-06-07 09:12:14

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-05-06

Tapo C310 fail pairing

2024-05-06 13:49:43 - last edited 2024-06-07 09:12:14

Tags: #ONVIF/RTSP #Installation

Model: Tapo C310

Hardware Version: V8

Firmware Version: 1.3.11

I have 2 Tapo C310 in the same network. One is working perfectly, the other, suddenly not.
I can acces the camera locally by connecting to the camera WiFi and opening the tap app (the

camera is working)
I can reset the camera (i did it a thousand of times)

But when trying to pair, it fails.
Again, the other c310 in the some network is working.

I have reset every modem, switch and router, but keep failing.
what can I do?

please help me on this

1 Accepted Solution

Solla-topee

2024-05-07 09:42:30 - last edited 2024-06-07 09:12:14

Posts: 13686

Helpful: 2364

Solutions: 2035

Stories: 8

Registered: 2020-05-19

Re:Tapo C310 fail pairing-Solution

2024-05-07 09:42:30 - last edited 2024-06-07 09:12:14

@Bripoch

Hi,
Please help confirm the following information for the reported case.
1. What's the LED status on the camera when fail to configure the camera?

2. Do you have internet when connecting to the front router's Wi-Fi on your phone? If so, reboot the router, and when it's working, factory reset the camera and reconfigure it.
Before configuring the camera, ensure the firewall, antivirus, MAC Filtering, Access Control, etc. are disabled on the router.

3. If the problem remains, enable a hotspot Wi-Fi on your phone, factory reset the camera, reconfigure it with a different phone, and connect it to the hotspot Wi-Fi, can you set it up successfully?

4. Please help confirm your network diagram.

Best Regards

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.

Recommended Solution

1 Reply

Solla-topee

2024-05-07 09:42:30 - last edited 2024-06-07 09:12:14

Posts: 13686

Helpful: 2364

Solutions: 2035

Stories: 8

Registered: 2020-05-19

Re:Tapo C310 fail pairing-Solution

2024-05-07 09:42:30 - last edited 2024-06-07 09:12:14

@Bripoch

Hi,
Please help confirm the following information for the reported case.
1. What's the LED status on the camera when fail to configure the camera?

3. If the problem remains, enable a hotspot Wi-Fi on your phone, factory reset the camera, reconfigure it with a different phone, and connect it to the hotspot Wi-Fi, can you set it up successfully?

4. Please help confirm your network diagram.

Best Regards

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.

Information

Helpful: 0

Replies: 1

Tapo C310 fail pairing

Tapo C310 fail pairing

Information

Voters 0

Tags