Tapo C520WS v1 vs v1.6
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello
I see that Tapo C520ws has received a new hardware revision namely 1.6. Old revision is v1.
@Solla-topee can you please clarify what has been changed in v1.6 compared to v1.
Also it would be nice if you can share v1.6 FCCID if it has changed.
Regards
Harmandeep
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
Small Updates to the hardware version such as 1.0 vs 1.6 are generally the same, with the difference in hardware version being something as simple as an indicator of what facility the device was manufactured in or where the device is being sold. Unless otherwise indicated, the firmware for 1.0 and 1.6 can be used interchangeably.
The FCCID of the Tapo C520WS V1 and V1.6 is the same one.
Best Regards
- Copy Link
- Report Inappropriate Content
Hi,
Small Updates to the hardware version such as 1.0 vs 1.6 are generally the same, with the difference in hardware version being something as simple as an indicator of what facility the device was manufactured in or where the device is being sold. Unless otherwise indicated, the firmware for 1.0 and 1.6 can be used interchangeably.
The FCCID of the Tapo C520WS V1 and V1.6 is the same one.
Best Regards
- Copy Link
- Report Inappropriate Content
@Solla-topee Can you please check and confirm if mic has received any hardware changes? The datasheets for v1.6 are not available and I don't think datasheets will point out if any changes were made to the mic.
- Copy Link
- Report Inappropriate Content
Hi,
The mic has no difference in hardware between Tapo C520WS V1 and V1.6.
Best Regards
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1183
Replies: 3
Voters 0
No one has voted for it yet.