Failed schedule after firmware update
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I was prompted for a firmware update about 2 days ago, then suddenly i noticed my on/off schedules arent being kept by the device anymore. I have to manually turn it on/off via the app every time. I also noticed it has no runtime history. Should i reset the device? Ive erased all schedules and re-done them. Timer doesnt work, its says Error, please try again later. P100
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Was the upgrade completed normally? Are there any accidents such as network interruptions or equipment power outages that may interfere with the upgrade?
This device is probably disconnected from the cloud. Can you check if you can still control it remotely with Tapo App? Such as when using cellular data.
It would be a good idea to restart the internet (router), or power cycle the smart plug.
- Copy Link
- Report Inappropriate Content
Hello @whitee,
This is true. Firmware on the app says 1.40, and it turns out that this update has screwed with the saved settings (schedules, timer etc) for the unit.
As an update:
I resorted to resetting the device and it is now working as it did previously. I just hope the next firmware update wouldnt require that step anymore 😅.
- Copy Link
- Report Inappropriate Content
Was the upgrade completed normally? Are there any accidents such as network interruptions or equipment power outages that may interfere with the upgrade?
This device is probably disconnected from the cloud. Can you check if you can still control it remotely with Tapo App? Such as when using cellular data.
It would be a good idea to restart the internet (router), or power cycle the smart plug.
- Copy Link
- Report Inappropriate Content
Hi @Wayne-TP , thanks for replying.
I believe the update was completed without incident and interruption. I could control the plug via the app thru mobile data and wifi. Timer as of this morning still says Error, try again later.
ill probably reset the plug and see what happens :)
- Copy Link
- Report Inappropriate Content
Resetting the device is also a viable option. If you're willing, you can try performing a reset. How to factory reset the Tapo or Kasa smart plugTapo or Kasa smart plug
Alternatively, you can send me a private message with the MAC address of your device, and we can assist you further.
*Let me know if you have already attempted a device reset.
- Copy Link
- Report Inappropriate Content
@Poli07 Question is, what's really the latest firmware of p100? the support page states 1.3.7 but on our devices its 1.4.0. this update really screwed the device. before this update, p100 is the most stable device in my house unlike other glitchy cctv and most of all smart bulbs
- Copy Link
- Report Inappropriate Content
Hello @whitee,
This is true. Firmware on the app says 1.40, and it turns out that this update has screwed with the saved settings (schedules, timer etc) for the unit.
As an update:
I resorted to resetting the device and it is now working as it did previously. I just hope the next firmware update wouldnt require that step anymore 😅.
- Copy Link
- Report Inappropriate Content
whitee wrote
@Poli07 Question is, what's really the latest firmware of p100? the support page states 1.3.7 but on our devices its 1.4.0. this update really screwed the device. before this update, p100 is the most stable device in my house unlike other glitchy cctv and most of all smart bulbs
Can you be more specific about the problem you're facing? If the symptoms are different, feel free to create a new post for feedback.
t's common for products to exhibit unusual behavior during use, and some issues may not be related to firmware updates. However, if they arise shortly after an update, it's understandable to suspect the new firmware. Generally, without widespread reports of the same issue, each individual's problem may have different causes. Connectivity issues typically manifest in a few ways, but various factors like product variations, network devices, wireless environments, and network quality contribute. Additionally, fluctuations and interference in the network, which aren't visible to the human eyes, make it unjustifiable to solely blame the problem on product firmware.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 774
Replies: 6
Voters 0
No one has voted for it yet.