Tapo C212 cannot be installed without Internet access

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Tapo C212 cannot be installed without Internet access

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Tapo C212 cannot be installed without Internet access
Tapo C212 cannot be installed without Internet access
2023-11-18 17:06:49
Tags: #Installation #NoCloud
Model: Tapo C212  
Hardware Version:
Firmware Version:

Let's just say, I mistrust any OEM of any IP camera deeply. So my Tapo C212 camera should be used without ever having Internet access According to the advertisment, this should be possible.

 

To fullfill the (idiotic) requirements of the Tapo App I came up with this setup: I configured a spare a WiFi router, connect the camera  via LAN to it and connect my phone to the very same WiFi. And all seems fine:

  • The C212 has an IP address
  • The phonehas an IP  address
  • I can ping the C212 from the phone
  • The router sees (and pings) both devices.

When I start the detection process in the Tapo App the C212 is not found. End of story, no happy ending.

 

Why does the Tapo App block me from just putting in the IP address of the camera and configure it?

Why does the camera not have a Web Interface to configure it? Could be an expert mode, whatever.

TP could make the world so much easier, but chose to not support static IP addresses. And, maybe, put a really big sign on the box saying: this device needs to access the Internet - only cloud usage is possible.

 

Any ideas or success stories?

  0      
  0      
#1
Options
1 Reply
Re:Tapo C212 cannot be installed without Internet access
2023-11-20 13:18:44

  @ConcernedUser42 

Hi,
It's required to have internet when setting up the Tapo camera, however, after that, you can block the internet to the camera, and the features do not require the internet will stay work, such as the Detection feature.

If you do not have a router with internet access, you can enable a hotspot Wi-Fi on your phone, and configure the camera to connect to the hotspot Wi-Fi to work via the Tapo app, after it's configured successfully, you can set up the features on the Tapo app for the camera as per your desire, then turn off the hotspot Wi-Fi on your phone, and some of the camera's features will still work, and some features that requires the internet access won't work, such as the sync time and date, notification, etc.

Best Regards

  0  
  0  
#2
Options

Information

Helpful: 0

Views: 585

Replies: 1

Tags

Related Articles