H100 trigger via Alexa - possible?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

H100 trigger via Alexa - possible?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
H100 trigger via Alexa - possible?
H100 trigger via Alexa - possible?
2023-06-23 09:00:02 - last edited 2023-07-04 09:35:49

I've got a few Tapo (and Kasa) devices around the home, as well as an Echo Show, Blink doorbell and access to the Alexa infrastructure.

 

I can trigger Tapo devices via Alexa / Echo Show to "do stuff".  E.g. turn on my bedroom lamp when I ask Alexa to do it.

 

Would I be able to trigger the H100 to sound a chime from the Alexa / Echo Show, or can it only sound a chime when responding to one of the Tapo smart devices such as a sensor, switch etc etc? 

 

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:H100 trigger via Alexa - possible?-Solution
2023-06-26 14:08:26 - last edited 2023-07-04 09:35:49

Replying to my own post to say this is very possible and quite straightforward; tested working with a Blink doorbell and the H100 chime, combined with an Echo Show 5 (plus Alexa app on my phone)

 

Whilst the H100 ring isn't immediately available from Alexa as an action (unlike, say, switching on a Tapo bulb would be), by luck I found that this works:-

- in the Tapo app, set a shortcut called "sound door chime" (or similar) and configure it to with the action "Smart Hub - Ring", with the appropriate ringer chosen and then a suitable duration (for me Doorbell 2 and 10 seconds)

- when you've done this, Alexa should recognise that a new "scene" has been created - your phone / your alexa device should tell you this

- then via the Alexa app set a routine e.g. called "door chime" which is triggered by the Blink doorbell pressed, and then add the Alexa custom action "turn on sound door chime"

 

Run it from a suitable echo / alexa device in the house, and it should mean that every time the Blink doorbell is pressed that the Tapo hub chime / ringer is activated.

 

A day's testing yesterday had this working (though at first I'd gone through using Tasker to achieve something similar, but that was over-complicated!)

Recommended Solution
  4  
  4  
#2
Options
3 Reply
Re:H100 trigger via Alexa - possible?-Solution
2023-06-26 14:08:26 - last edited 2023-07-04 09:35:49

Replying to my own post to say this is very possible and quite straightforward; tested working with a Blink doorbell and the H100 chime, combined with an Echo Show 5 (plus Alexa app on my phone)

 

Whilst the H100 ring isn't immediately available from Alexa as an action (unlike, say, switching on a Tapo bulb would be), by luck I found that this works:-

- in the Tapo app, set a shortcut called "sound door chime" (or similar) and configure it to with the action "Smart Hub - Ring", with the appropriate ringer chosen and then a suitable duration (for me Doorbell 2 and 10 seconds)

- when you've done this, Alexa should recognise that a new "scene" has been created - your phone / your alexa device should tell you this

- then via the Alexa app set a routine e.g. called "door chime" which is triggered by the Blink doorbell pressed, and then add the Alexa custom action "turn on sound door chime"

 

Run it from a suitable echo / alexa device in the house, and it should mean that every time the Blink doorbell is pressed that the Tapo hub chime / ringer is activated.

 

A day's testing yesterday had this working (though at first I'd gone through using Tasker to achieve something similar, but that was over-complicated!)

Recommended Solution
  4  
  4  
#2
Options
Re:H100 trigger via Alexa - possible?
2023-06-27 08:17:34

  @larkim 

 

Thank you for sharing! Utilizing Alexa or Google is indeed a good way to run Tapo with your existing smart devices together.

Landscape Mode - Tapo App for PadShare Your Pet Story. Win Free Tapo Care!Smart Action 2.0 Explore and meet the next level home automation.
  0  
  0  
#3
Options
Re:H100 trigger via Alexa - possible?
2023-06-27 09:25:51

  @Wayne-TP No worries.

 

What would have been even better was if the H100 showed up as a basic device in both Alexa / Google Home.  In the same way that a light bulb would do.  

 

The workaround works fine for me, but a simple change to have the device immediately available to Alexa would have been even better and simpler to set up!  Hopefully a future firmware update or similar will see this functionality added?

  1  
  1  
#4
Options

Information

Helpful: 0

Views: 1565

Replies: 3

Related Articles