c420 trigger h200 alarm off schedule
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi, recently set up a c420s system, impressed so far.
However, when I set the cameras to trigger the h200 hub alarm, the hub alarm sounds at every detection the cameras make and not just when the cameras are scheduled to sound an alarm.
Can anyone advise please?
Many thanks
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@edbb @Kaptain-K
Hi,
You can set the Tapo H200 to alarm during a specific time with the Smart Action(Automation) feature. Below are the instructions.
1) With the latest Tapo app, go to the camera Device Settings>Alarm>Trigger Hub Alarm page to turn off it.
2) Go to the Smart Action page to add an Automation entry to trigger the hub alarm when the camera detects events, and you can set the effective time for this Automation entry to work.
How to create Smart Action (automation or a shortcut) of my Tapo devices?
Trigger: when the camera detects motion, person, etc.
Action: Ring the hub Tapo H200
Effective Time: select Custom Time and set the time you want the entry to work.
Best Regards
- Copy Link
- Report Inappropriate Content
Hello,
Thank you for the case report. Regarding the issue:
1) Please help confirm if the Tapo C420 and the hub H200 have the same Time Zone settings and if not, please correct the device's time zone.
2) If you have more than one camera, please check if the other camera has the same Alarm settings.
3) Please try to reboot the camera and the hub, and then check if the Alarm feature will work fine.
4) If the problem remains, please let me know when(time, date, and time zone) did you hear an unexpected alarm.
Best Regards
- Copy Link
- Report Inappropriate Content
Hi @Solla-topee
I can confirm that all 4 cameras and the hub are set to the same time. They have also all been rebooted.
The hub alarm still goes off when scheduled not to.
Eg the garden camera just now triggered the hub alarm. 7.19pm 26th may uk. Please can you help.
Many thanks
timezone.
- Copy Link
- Report Inappropriate Content
Hi,
Please check if the hub and the camera have the latest firmware.
How to update the firmware of Tapo devices in the Tapo App?
And please send me the MAC address of the camera and the hub via private message to double-check.
Best Regards
- Copy Link
- Report Inappropriate Content
Hi,
Thank you for the detailed device info via private message.
I double-checked the camera alarm feature and found that the Tapo C420 has the Alarm feature itself, when it detects an event, it can alarm itself and also trigger the Hub alarm when the 'Trigger Hub Alarm' feature is enabled. However, the Alarm Schedule configured on the Camera Alarm page applies to the camera itself rather than the hub.
Best Regards
- Copy Link
- Report Inappropriate Content
@Solla-topee Thank you for checking. Please can I ask for this to be looked into as it would be a brilliant feature if you could provision it? Many thanks Ed
- Copy Link
- Report Inappropriate Content
Hi,
Thank you for your feedback. While we don't have any specific details that I can share about if this feature can come to the product or when it might, I'll log the feature request and pass it along to the team to evaluate.
Best Regards
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@edbb I added this to the Feature Request section of this forum here:
https://community.tp-link.com/en/smart-home/forum/topic/622254?page=1
As this is something I also thought the system could do and want to happen.
If you go to that you can click to vote on it, the more votes it gets the more likely it will be to be implemented.
- Copy Link
- Report Inappropriate Content
@edbb @Kaptain-K
Hi,
You can set the Tapo H200 to alarm during a specific time with the Smart Action(Automation) feature. Below are the instructions.
1) With the latest Tapo app, go to the camera Device Settings>Alarm>Trigger Hub Alarm page to turn off it.
2) Go to the Smart Action page to add an Automation entry to trigger the hub alarm when the camera detects events, and you can set the effective time for this Automation entry to work.
How to create Smart Action (automation or a shortcut) of my Tapo devices?
Trigger: when the camera detects motion, person, etc.
Action: Ring the hub Tapo H200
Effective Time: select Custom Time and set the time you want the entry to work.
Best Regards
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 788
Replies: 9
Voters 0
No one has voted for it yet.