Hello @Drors
"Detection Recording" records when the motion event is triggered
- Confirm Motion Detection is 'ON', and you have set up proper Activity zone & Sensitivity settings as instruction here
How to use motion detection function of my Tapo camera in Tapo app
- Try a different SD card , a high enduration SD card is recommended
Which microSD cards are supported on Tapo and Kasa Cameras?
- Check SD card left capacity. If SD card capacity is nearly full, and Loop recording is enabled ->
Verify the SD card with H2testw software ( check if ii an expanded capacity SD card) as the instruction below and share a photo with the test results (back up important files before run the test)
https://www.tp-link.com/support/faq/2592/
- Later backup SD card content on a computer and format SD on the Tapo APP and see if SD card recording work again.
If still the same , please enable Alarm and see if Alarm goes off when there is a motion detected? Camera should record
1) the photo showing the concern
2) Do you use Motion Detection recording or Continuous recording, can I have photo of motion detection settings including Recording Schedule, Activity Zone & Sensitivity
3) Tapo APP version & model of phone and its Andriod or IOS version
4) Mac address of camera( please share MAC by private message)