Kasa 3 way switch help on 4 way

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Kasa 3 way switch help on 4 way

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Kasa 3 way switch help on 4 way
Kasa 3 way switch help on 4 way
2022-02-02 07:23:21
Model: HS210  
Hardware Version: V3
Firmware Version: 1.0.6

Hi,

 

I purchased a set(2) of 3-way switches for my 4-way switch. I read that if I swap the dumb 3-way for a Kasa 3-way it will work. 
 

If I swap both 3way dumb switch for Kasa smart switches, light doesn't work at all. If I swap one dummy 3-way for a Kasa 3-way, it works but only on that one switch. If I turn off the other switches, it turns off the smart switch. So now, the only way to operate the lights are through the app and through the Kasa smart switch. 
 

How can I make it so all the switches work?

 

thanks in advance!

  0      
  0      
#1
Options
2 Reply
Re:Kasa 3 way switch help on 4 way
2022-02-02 16:50:32

@Jonkou888 

"If I turn off the other switches, it turns off the smart switch." means you've wired it wrong.  You should consult with an electrician - you can't wire them correctly unless you know what all of your in wall wires do and no one here can help you without a wiring diagram.

AutomationManager: Secure home automation without relying on cloud servers.
  0  
  0  
#2
Options
Re:Kasa 3 way switch help on 4 way
2022-02-07 10:14:19

@Jonkou888 

Thanks for reaching out to us. 

Like Mike_P said, your wiring is not correct. Below are some guidance for your reference. If you are not clear about the wiring in your house, it is suggested to consult an electrician.

1> Follow the Setup Video "How to install the Kasa 3-way Light Switch Kit" to and examine the wiring of HS210 step by step.
https://www.tp-link.com/support/download/hs210-kit/
2> Correctly wiring HS210 requires at least 4 lines in each electrical box:
1*Common Wire (Live or Load) ,1* Neutral wire, 2*Traveller Wires ,1*Ground Wire (optional)
(NOTE: If No Neutral Wire is present, HS210 can Not be installed )

• WHITE wire on switch to NEUTRAL wire.
• GREEN wire on switch to green/bare copper GROUND wire.
• Black Screw on the side of switch to COMMON (LIVE/LOAD) wire
• 2 *White Srews on the bottom of switch to 2 *TRAVELLER wires

(NOTE:Please identify COMMON wire as the setup video, examine old Swtich , one Screw would be different color, usually black, that is the common wire )

Here is an instruction for your reference:
https://www.tp-link.com/support/faq/2009/

PS: Yes connected to the switch is 2 travelers(the brass screws) and 1 common(the black screw). you do not need both switches, connect the one switch that has the neutral in the box. Add the white wire from the HS210 to the group of neutrals.

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 1321

Replies: 2

Related Articles